Low Frequency On/Off Grid Hybrid Solar Inverter

PH3000 Three-phase Series (9-12KW)


  • Rated power 9KW to 12KW
  • Smart LCD setting(Working modes, Charge Current, Charge Voltage, etc.)
  • Built-in MPPT 180A solar charge controller
  • MPPT Efficiency max 98%
  • Combining solar system, AC utility, and battery power source to supply continuous power
  • Multiple operations: basic Grid-tie, Off-Grid, Grid-Interactive
  • Support CAN, RS485 monitoring function with free CD
  • WIFI/ GPRS remote monitoring (optional)
  • Compatible to generator

Two Colors Option:



Where to Buy?



Home Solar Power Inverter

9-12KW On/Off Grid Hybrid Solar Inverter for Home Power System.


MPPT Solar Charge Controller

Built-in MPPT 180A solar charge controller.


Pure Sine Wave

Pure sine wave output.


LCD/LED Display Information

1. LCD display
2. Fault indicator
3. Charging indicator
4. Function buttons
5. Status indicator

Figure Back Panel Information

6. BTS
7. CAN&RS485 communication port
8. Battery input
9. Inverter output protect
10. Grid breaker
11. Earth
12. Earth
13. Grid
14. Load
15. PV input


Computer Monitoring Page



Solar System Connection

This is a flexible and intelligent energy storage inverter which utilizes solar power, utility power, and battery power source to supply continuous power. This is a multi-functional hybrid inverter which can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner. The system generates electricity when it has sufficient sunshine, supplying power to your home and feeding any surplus power back to the Grid.



Model PH30-9048-T PH30-12048-T
Default Battery System Voltage 48VDC
Rated output power 9000W 12000W
Output wave Pure sine wave
Nominal output voltage 230 VAC (P-N) / 400 VAC (P-P)
Nominal output current 13.0A per phase 17.4A per phase
Nominal output frequency 50 Hz / 60 Hz
Rate of wave distortion(THD)(Linearity loads) Off grid≤2%;Grid discharge ≤3%;Grid charge ≤3%
Inverting efficiency >93%
Power factor 0.9 lead – 0.9 lag
Overload capability 100%<load≤110%,30 minutes; 110%<load≤125%,1 minutes; 125%<load≤150%,30 seconds; load>150%,10 seconds; Short circuit,5 seconds
AC input maximum current 26.0A per phase 34.8A per phase
Nominal frequency 50Hz / 60Hz
Acceptable input voltage range Defaults 186Vac ~253Vac per phase; Narrow 174Vac ~272Vac per phase; Wide    95Vac ~272Vac per phase
Nominal Voltage 48VDC
Low Voltage Protection Point Charger 34.0VDC;Inverter 40.0VDC
Absorption Voltage 50.0VDC
Refloat Voltage 54.8VDC
Float Voltage 57.2VDC
PV Open Circuit Voltage 145VDC
Max MPPT Solar Charging Current 60A*3PCS(Optional)
Max AC Charging Current 60A per phase 80A per phase
Max Charging Current 120A per phase 140A per phase
Mounting Vertical
W*H*D(mm) 391*836*555
Net weight(kg) 129 145.5
Communication terminal RS485/CAN bus
Operation Temperature Range -25℃~+50℃
Environmental Protection Rating IP20
Ambient humidity 0 — 90% relative humidity(non-condensing)
Altitude ≤3000m

Approximate Back-up Time Table

Model Load(W) Back Time@4*100Ah(48Vdc) (min) Back Time@4*200Ah(48Vdc )(min) Back Time@8*200Ah(48Vdc) (min)
9KW 900 240 536 1096
3600 42 99 252
6300 24 49 120
9000 17 35 68
12KW 1200 153 358 830
4800 32 72 165
8400 18 35 79
12000 12 23 51
  • Brochure: PH3000THREE.pdf Download
  • User Manual: 420-00200-02-PH3000-Three.pdf Download
  • Software: RS485-Software-for-EP18-PV18-PH18-PH30-PV35-Wincc-2.0.30&Ch340tDrver.7z Download
  • Software: Usb-to-Rs485-Driver.zip Download




Related Products

Go Solar Power The World! Contact Now